A1 Start kit Extended consists of:
- 2.5 kg A1 Liquid
- 5 kg A1 Powder
- 5 m2 A1 Triaxial fibre
- 0.25 kg A1 Retarder to extend your working time
- 0.25 kg A1 Thix A to thicken A1
- 0.25 kg A1 Sealer
- 0.25 kg A1 Iron powder for special effects
- 0.25 A1 Black pigment
- 1 kg A1 ATP powder
- 30 mm A1 High Shear Mixer
- 1 kg filler sand
- 1 m2 C-veil
- Solvent free
- Low heat development (max 40°C)
- Shrinkage-free
- Environmentally friendly
- Very high fire-resistant properties
- UV stabilized
- Color pigments can be added
- Wide variety of surface structures
- Rainwater resistant (if sealed)
- Good mechanical properties
Acrylic One / A1 Extended Starter Kit
It is important to weigh and mix A1 very carefully, based on the following mixing ratio: 1 part A1 Liquid to 2 parts A1 Powder. Fill a mixing cup or bucket with the amount of A1 Liquid required. Use the stainless-steel High Shear Mixer to create a swirl and then add the A1 Powder. Stir the mix until smooth and lump-free and then stir for another 30 seconds. Make sure that the material on the bottom and sides of the cup or bucket is mixed in properly too.